MICROTHERM® SLATTED-1000R

WŁAŚCIWOŚCI I ZALETY

  • Hydrophobic
  • Custom made & flexible
  • High thermal stability
  • Non combustible
  • Simple to cut & shape
  • Clean & easy to install
  • Environmentally friendly
  • Resistant to most chemicals

For annular chimneys and heating flues

The MICROTHERM® SLATTED range of products are custom made, flexible microporous insulation panels with very good thermal properties.

The panels are produced in a glass cloth outer envelope, making them clean & easy to handle. The bending of the panels is one-directional, suitable for 2D applications. The formulation is an opacified blend of filament reinforced pyrogenic silica.

MICROTHERM® SLATTED-1000R is a flexible, custom made insulation panel.

Dane techniczne
< #Back#
Click on the product Kategoria name in the table below to go to the other MICROTHERM® SLATTED product detail page.


 MICROTHERM® SLATTED
Grade
-1000R -1000R HY
Temperatura klasyfikacyjna °C 
1000 1000
Gęstość pozorna kg/m3
240 260
Skurcz @1000 °C – Całkowite obciążenie 24 h, %  
< 3
< 3
Przewodnictwo cieplne @600 °C średnio, W/m.K 
0.035
0.035
Wytrzymałość na ściskanie (ASTM C 165), N/mm2  0.13 0.12
Click on the product Kategoria name in the table below to go to the other MICROTHERM® SLATTED product detail page.


 MICROTHERM® SLATTED
Grade
-1000R -1000R HY
Temperatura klasyfikacyjna °C 
1000 1000
Gęstość pozorna kg/m3
240 260
Skurcz @1000 °C – Całkowite obciążenie 24 h, %  
< 3
< 3
Przewodnictwo cieplne @600 °C średnio, W/m.K 
0.035
0.035
Wytrzymałość na ściskanie (ASTM C 165), N/mm2  0.13 0.12
Product Standardowe wymiary i formaty
< #Back#
Although there are some standard stock sizes available, MICROTHERM® SLATTED can be custom made according to customer specifications. Please contact your regional Promat agency to request your MICROTHERM® SLATTED sizes.
The Grubość range is from 3mm up to 25mm.
Although there are some standard stock sizes available, MICROTHERM® SLATTED can be custom made according to customer specifications. Please contact your regional Promat agency to request your MICROTHERM® SLATTED sizes.
The Grubość range is from 3mm up to 25mm.
Tolerancje wymiarowe
< #Back#
Szerokość mm   
± 3
Szerokość mm  
   ± 15*
Grubość mm      T ≤ 10     ± 0.5          
10 < T ≤ 25 
  ± 0.8        

The shape of MICROTHERM® SLATTED panels offers the possibility to adjust the width on-site.

 

Szerokość mm   
± 3
Szerokość mm  
   ± 15*
Grubość mm      T ≤ 10     ± 0.5          
10 < T ≤ 25 
  ± 0.8        

The shape of MICROTHERM® SLATTED panels offers the possibility to adjust the width on-site.

 

Obróbka i przetwarzanie
< #Back#
MICROTHERM® SLATTED can be shaped easily with a simple cutter (the procedure can be found in our catalogue on microporous insulation). The panels can be fixed in place with glue or by mechanical średnios such as anchors, pins and clips. For piping applications, the panels are installed with wire and straps, identical to conventional insulation materials.
MICROTHERM® SLATTED can be shaped easily with a simple cutter (the procedure can be found in our catalogue on microporous insulation). The panels can be fixed in place with glue or by mechanical średnios such as anchors, pins and clips. For piping applications, the panels are installed with wire and straps, identical to conventional insulation materials.
Typowe zastosowania
< #Back#
Microporous insulation offers an extremely low Przewodnictwo cieplne, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified:

  • Petrochemical industry & power generation
  • Piping insulation (ideal for large diameters)
  • Back-up insulation in refractory lined pipes
  • Fuel cells
  • Vessels & reactors
  • Exhaust systems
Microporous insulation offers an extremely low Przewodnictwo cieplne, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified:

  • Petrochemical industry & power generation
  • Piping insulation (ideal for large diameters)
  • Back-up insulation in refractory lined pipes
  • Fuel cells
  • Vessels & reactors
  • Exhaust systems