MICROTHERM® OVERSTITCHED-1000R HY

WŁAŚCIWOŚCI I ZALETY

  • Hydrophobic
  • Custom made & very flexible
  • High thermal stability
  • Non combustible
  • Shock & vibration resistant
  • Clean & easy to install
  • Environmentally friendly

For annular chimneys and heating flues

The MICROTHERM® OVERSTITCHED range of products are custom made flexible microporous insulation panels with very good thermal properties. The panels are produced in a glass cloth outer envelope, making them clean and easy to handle. Stitching is twodirectional (3D flexure). The formulation is an opacified blend of filament reinforced pyrogenic silica.

MICROTHERM® OVERSTITCHED- 1000R HY is a flexible, custom made insulation panel with a hydrophobic core treatment to repel water. It is ideal for applications where contact with liquid water or condensation (dew point) is possible.

Dane techniczne
< #Back#
Click on the product Kategoria name in the table below to go to the other MICROTHERM® OVERSTITCHED product detail pages.


 MICROTHERM® OVERSTITCHED
Grade
-1000R  -1000R HY
-1200
Temperatura klasyfikacyjna °C 
1000 1000
1200
Gęstość pozorna kg/m3 
220 260 350 
Skurcz @1000 °C – Całkowite obciążenie 24 h, %  
< 3
 < 3
< 0.1
Przewodnictwo cieplne @600 °C średnio, W/m.K 
0.038
0.038
0.049
Wytrzymałość na ściskanie (ASTM C 165), N/mm2  0.10 0.12 0.22

Click on the product Kategoria name in the table below to go to the other MICROTHERM® OVERSTITCHED product detail pages.


 MICROTHERM® OVERSTITCHED
Grade
-1000R  -1000R HY
-1200
Temperatura klasyfikacyjna °C 
1000 1000
1200
Gęstość pozorna kg/m3 
220 260 350 
Skurcz @1000 °C – Całkowite obciążenie 24 h, %  
< 3
 < 3
< 0.1
Przewodnictwo cieplne @600 °C średnio, W/m.K 
0.038
0.038
0.049
Wytrzymałość na ściskanie (ASTM C 165), N/mm2  0.10 0.12 0.22

Product Standardowe wymiary i formaty
< #Back#
Although there are some standard stock sizes available, MICROTHERM® OVERSTITCHED can be custom made according customer specifications. Please contact your regional Promat agency to request your MICROTHERM® OVERSTITCHED sizes.

The standard Grubość range is from 3mm up to 10mm. Additionally, Grubośćes between 10mm and 15mm are available on request.
Although there are some standard stock sizes available, MICROTHERM® OVERSTITCHED can be custom made according customer specifications. Please contact your regional Promat agency to request your MICROTHERM® OVERSTITCHED sizes.

The standard Grubość range is from 3mm up to 10mm. Additionally, Grubośćes between 10mm and 15mm are available on request.
Tolerancje wymiarowe
< #Back#
Szerokość mm  
   ± 3
Szerokość mm  
   ± 3
Grubość mm         ± 0.5    


 

Szerokość mm  
   ± 3
Szerokość mm  
   ± 3
Grubość mm         ± 0.5    


 

Obróbka i przetwarzanie
< #Back#
MICROTHERM® OVERSTITCHED can be shaped easily with a simple cutter (the procedure can be found in our handbook on microporous insulation). The panels can be fixed in place with glue or by mechanical średnios such as anchors, pins and clips. For piping applications, the panels are installed with wire and straps, identical to conventional insulation materials.
MICROTHERM® OVERSTITCHED can be shaped easily with a simple cutter (the procedure can be found in our handbook on microporous insulation). The panels can be fixed in place with glue or by mechanical średnios such as anchors, pins and clips. For piping applications, the panels are installed with wire and straps, identical to conventional insulation materials.
Typowe zastosowania
< #Back#
Microporous insulation offers an extremely low Przewodnictwo cieplne, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified:

  • Petrochemical industry & power generation
  • Piping insulation
  • Back-up insulation in refractory lined pipes
  • Rotary kiln insulation
  • Hot pipe support insulation
  • Exhaust systems
  • Filler material for mattresses, cassettes, heat shields, expansion joints
  • PFP (Passive Fire Protection)
Microporous insulation offers an extremely low Przewodnictwo cieplne, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified:

  • Petrochemical industry & power generation
  • Piping insulation
  • Back-up insulation in refractory lined pipes
  • Rotary kiln insulation
  • Hot pipe support insulation
  • Exhaust systems
  • Filler material for mattresses, cassettes, heat shields, expansion joints
  • PFP (Passive Fire Protection)