en
Promat Inc.United States of America
Open contact page
Home Products  
Applications  
Temperatures  
Technologies  
About us  
Service & contact  
  1. Promat Industry - thermal insulation, fire and acoustic protection
  2. Petrochem
  3. Petrochemical processing
  4. PROMALIGHT-1200

PROMALIGHT®-1200

PROPERTIES & ADVANTAGES

  • Extremely low thermal conductivity
  • Non combustible
  • Easy to handle
  • Excellent machinability
  • No harmful respirable fibres
  • Environmentally friendly
  • Resistant to most chemicals
PROMALIGHT® : TECHNICAL DATA SHEET - ENGLISH

Microporous insulation boards for fired heaters

The PROMALIGHT® range of products is available in various coverings (PE foil & Aluminium). As an option, a reinforcement mica layer can be applied on both sides. This M-series increases the compressive strength by around 30% and improves handling.

PROMALIGHT®-1200 is an alumina based insulation board product at higher density and is capable of withstanding peak temperatures of 1200 °C.

Technical data
< #Back#


 PROMALIGHT® 
Grade
 -1000X -1000X
 -1200
Classification temperature °C 
1000 1000
 1200
Bulk density kg/m3
 280 320 450
Shrinkage @1000 °C – 24h full soak, %  
 < 3
 < 3
 < 0.1
Thermal conductivity @600 °C mean, W/m.K 
 0.030
 0.029
 0.039
Compressive strength (ASTM C 165), N/mm2  0.32 0.32 0.54


 PROMALIGHT® 
Grade
 -1000X -1000X
 -1200
Classification temperature °C 
1000 1000
 1200
Bulk density kg/m3
 280 320 450
Shrinkage @1000 °C – 24h full soak, %  
 < 3
 < 3
 < 0.1
Thermal conductivity @600 °C mean, W/m.K 
 0.030
 0.029
 0.039
Compressive strength (ASTM C 165), N/mm2  0.32 0.32 0.54
Dimensions & size availability
< #Back#
PROMALIGHT® boards are produced in standard sizes. Smaller sizes are also available on request. Please contact your regional Promat agency to request your PROMALIGHT® sizes.

Length mm  
605
Width mm   
 525
Thickness mm  
 5 – 50

Additionally, even thinner boards are available upon request, down to 2mm. These products are then often referred to as thin sheet.

PROMALIGHT® boards are produced in standard sizes. Smaller sizes are also available on request. Please contact your regional Promat agency to request your PROMALIGHT® sizes.

Length mm  
605
Width mm   
 525
Thickness mm  
 5 – 50

Additionally, even thinner boards are available upon request, down to 2mm. These products are then often referred to as thin sheet.

Production tolerances
< #Back#
Length mm   
 ± 3
Width mm  
 ± 3
Thickness mm       T ≤ 30    ± 1.0     
 T > 30
  ± 1.5     


 

Length mm   
 ± 3
Width mm  
 ± 3
Thickness mm       T ≤ 30    ± 1.0     
 T > 30
  ± 1.5     


 

Working & processing
< #Back#
PROMALIGHT® boards can be shaped both manually and with stationary wood processing machinery. They can be cut, sawn, drilled and punched. The boards can be fi xed in place with glue or by mechanical means such as anchors, pins and clips.
PROMALIGHT® boards can be shaped both manually and with stationary wood processing machinery. They can be cut, sawn, drilled and punched. The boards can be fi xed in place with glue or by mechanical means such as anchors, pins and clips.
Typical applications
< #Back#
Microporous insulation offers an extremely low thermal conductivity, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified.

  • Back-up insulation in industrial furnaces
  • Aluminium industry (launders, holding & smelter furnace, …)
  • Glass & ceramics industry
  • Petrochemical industry (cracking furnace, hydrogen reformer, …)
  • Fuel cells (SOFC)
  • Thermal batteries
  • Data loggers (protection of electronic components)
  • Black box & VDR (Voyage Data Recorder) for air, rail, and marine
Microporous insulation offers an extremely low thermal conductivity, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified.

  • Back-up insulation in industrial furnaces
  • Aluminium industry (launders, holding & smelter furnace, …)
  • Glass & ceramics industry
  • Petrochemical industry (cracking furnace, hydrogen reformer, …)
  • Fuel cells (SOFC)
  • Thermal batteries
  • Data loggers (protection of electronic components)
  • Black box & VDR (Voyage Data Recorder) for air, rail, and marine

Send hard copy

Download


#Project related info#

Send by mail


#Project related info#

home --- Legal statement
linkedin

To make this session as pleasant as possible this website makes use of cookies. If you do not want this, please close this window. In the other case, please click on "Accept".