en
Promat Inc.United States of America
Open contact page
Home Products  
Applications  
Temperatures  
Technologies  
About us  
Service & contact  
  1. Promat Industry - thermal insulation, fire and acoustic protection
  2. Energy
  3. Power Generation
  4. MICROTHERM SLATTED-1000X HY

MICROTHERM® SLATTED-1000X HY

PROPERTIES & ADVANTAGES

  • Hydrophobic
  • Custom made & flexible
  • High thermal stability
  • Non combustible
  • Simple to cut & shape
  • Clean & easy to install
  • Environmentally friendly
  • Resistant to most chemicals
MICROTHERM® SLATTED : TECHNICAL DATA SHEET - ENGLISH

Flexible microporous insulation panels for conventional power generation

The MICROTHERM® SLATTED range of products are custom made, flexible microporous insulation panels with very good thermal properties.

The panels are produced in a glass cloth outer envelope, making them clean & easy to handle. The bending of the panels is one-directional, suitable for 2D applications. The formulation is an opacified blend of filament reinforced pyrogenic silica.

MICROTHERM® SLATTED-1000X HY is a flexible, custom made insulation panel with a hydrophobic core treatment to repel water. Ideal for installation purposes or where condensation (dew point) might be a risk.

Technical data
< #Back#


 MICROTHERM® SLATTED
Grade
 -1000X -1000X HY
Classification temperature °C 
1000 1000
Bulk density kg/m3
 240 260
Shrinkage @1000 °C – 24h full soak, %  
 < 3
 < 3
Thermal conductivity @600 °C mean, W/m.K 
 0.035
 0.035
Compressive strength (ASTM C 165), N/mm2  0.13 0.12


 MICROTHERM® SLATTED
Grade
 -1000X -1000X HY
Classification temperature °C 
1000 1000
Bulk density kg/m3
 240 260
Shrinkage @1000 °C – 24h full soak, %  
 < 3
 < 3
Thermal conductivity @600 °C mean, W/m.K 
 0.035
 0.035
Compressive strength (ASTM C 165), N/mm2  0.13 0.12
Dimensions & size availability
< #Back#
Although there are some standard stock sizes available, MICROTHERM® SLATTED can be custom made according to customer specifications. Please contact your regional Promat agency to request your MICROTHERM® SLATTED sizes.

The thickness range is from 3mm up to 25mm.
Although there are some standard stock sizes available, MICROTHERM® SLATTED can be custom made according to customer specifications. Please contact your regional Promat agency to request your MICROTHERM® SLATTED sizes.

The thickness range is from 3mm up to 25mm.
Production tolerances
< #Back#
Length mm  
 ± 3
Width mm  
    ± 15*
Thickness mm      T ≤ 10     ± 0.5          
10 < T ≤ 25 
   ± 0.8    

* The shape of MICROTHERM® SLATTED panels offers the possibility to adjust the width on-site.
Length mm  
 ± 3
Width mm  
    ± 15*
Thickness mm      T ≤ 10     ± 0.5          
10 < T ≤ 25 
   ± 0.8    

* The shape of MICROTHERM® SLATTED panels offers the possibility to adjust the width on-site.
Working & processing
< #Back#
MICROTHERM® SLATTED can be shaped easily with a simple cutter (the procedure can be found in our catalogue on microporous insulation). The panels can be fixed in place with glue or by mechanical means such as anchors, pins and clips. For piping applications, the panels are installed with wire and straps, identical to conventional insulation materials.
MICROTHERM® SLATTED can be shaped easily with a simple cutter (the procedure can be found in our catalogue on microporous insulation). The panels can be fixed in place with glue or by mechanical means such as anchors, pins and clips. For piping applications, the panels are installed with wire and straps, identical to conventional insulation materials.
Typical applications
< #Back#
Microporous insulation offers an extremely low thermal conductivity, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified:

  • Petrochemical industry & power generation
  • Piping insulation (ideal for large diameters)
  • Back-up insulation in refractory lined pipes
  • Fuel cells
  • Vessels & reactors
  • Exhaust systems
Microporous insulation offers an extremely low thermal conductivity, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified:

  • Petrochemical industry & power generation
  • Piping insulation (ideal for large diameters)
  • Back-up insulation in refractory lined pipes
  • Fuel cells
  • Vessels & reactors
  • Exhaust systems

Send hard copy

Download


#Project related info#

Send by mail


#Project related info#

home --- Legal statement
linkedin

To make this session as pleasant as possible this website makes use of cookies. If you do not want this, please close this window. In the other case, please click on "Accept".